Firmware Download
Both DSP firmware and Front Panel firmware can be updated via USB. The update procedure is described in the user manual.
Important:
- For the procedure to update to Version 1.36 please refer to the document New Functions in Release 1.36. Before installing Version 1.36, make sure that either DSP Firmware Version 1.35k or Version 1.35m is installed on the ADT-200A.
DSP Firmware
- DSP Firmware Version 1.40g (runtime module)
- DSP Firmware Version 1.40g (backup module)
- DSP Firmware Version 1.39f (runtime module)
Important: The 60m band uses the harmonic filter from 40m band and therefore the second and third harmonic are not attenuated enough. It is the operator's responsibility to use either an external filter or a selective antenna coupler. Also, national restrictions of transmit power must be respected. - DSP Firmware Version 1.39d (runtime module)
- DSP Firmware Version 1.39b (backup module)
- DSP Firmware Version 1.36c (runtime module)
- DSP Firmware Version 1.36c (backup module)
- TX Filter Coefficients 1.36
- DSP Firmware Version 1.35m
Frontpanel Firmware
- Frontpanel Version 1.27a
- Frontpanel Version 1.26b
- Frontpanel Version 1.26a
- Frontpanel Version 1.24c
- Front panel Version 1.22b
Documents
- Release Notes 1.40g
- User Manual for Transverter TRV1D (in German only)
- Release Notes 1.39d
- New Functions in Release 1.36
PC Software Download
ADAT Commander
The ADAT Commander is a PC tool to control the ADT-200a via USB. Option R1 is required to use the software.
Spectrum Analyzer
Option S1 is required for operation of the ADAT spectrum analyzer. For operation under Win10+ see appendix of Release Notes 1.40.